tag:blogger.com,1999:blog-52918137446442537392011-11-27T15:58:40.108-08:00Engineering Your Knowledge!!EmpEdhttp://www.blogger.com/profile/12579251538554721877noreply@blogger.comBlogger51100tag:blogger.com,1999:blog-5291813744644253739.post-57271410760922228482009-08-06T02:54:00.000-07:002009-08-06T02:56:32.400-07:00

A few of the benefits of planting Hydroponically:Major Factors (Large Scale Hydroponic Farming)As the population of our planet sores and arable land becomes less available and more expensive, Hydroponics’ may offer us an important alterior option. This is because more plants grow per square foot hydroponically than in traditional soil based gardens, as in Hydroponics, plant roots are directly fed

EmpEdhttp://www.blogger.com/profile/12579251538554721877noreply@blogger.com2tag:blogger.com,1999:blog-5291813744644253739.post-15567729715684840652009-08-06T02:22:00.000-07:002009-08-06T06:24:01.937-07:00

Hydroponics comes from the Greek words meaning Hydro ("Water") and Ponos ("labour") literally meaning " water working")Hydroponics’ basically means growing plants in a nutrient rich solution! The use of Hydroponic growing is simply just a more effective way of providing your plant with food and water than traditional methods! The science of Hydroponics’ proves that soil is not required for plant

EmpEdhttp://www.blogger.com/profile/12579251538554721877noreply@blogger.com0tag:blogger.com,1999:blog-5291813744644253739.post-26690869864789829592009-08-04T04:36:00.000-07:002009-08-04T04:42:07.318-07:00

The 4 Main Drill Bit ShanksStraight Shank :Shape: Circular ShapeThis is the most common drill bit shank and is almost always made the same diameter as the fluted area (cutting area). With minimum effort these shanks can be shaped differently to increase grip and torque.Reduced Shank:Shape: Circular ShapeThe reduced shank is most noticable by the step in the shank. This is done to provide thicker

EmpEdhttp://www.blogger.com/profile/12579251538554721877noreply@blogger.com0tag:blogger.com,1999:blog-5291813744644253739.post-80001467305379292912009-08-04T00:48:00.000-07:002009-08-04T00:52:47.323-07:00

Bolt Descriptions The Difference Between A Bolt And A Set Screw:The Bolt: The Bolt is characterised as with out a full thread (i.e the thread does not reach the head), this part is known as the Shank. Bolts are generally not available in the shortest lengths as there is no room for the shank, and typically you will receive a Set Screw in place of a Bolt. The Bolt allows for movement.The Set Screw

EmpEdhttp://www.blogger.com/profile/12579251538554721877noreply@blogger.com0tag:blogger.com,1999:blog-5291813744644253739.post-62147582666596556682009-08-04T00:32:00.000-07:002009-08-04T00:34:51.705-07:00

Tensile Strength High Strength Steel Bolts usually have an hexagonal head with an ISO strength rating (called property class) stamped on the head. The property classes most often used are 4.8, 5.8, 8.8, 10.9. The number before the point is approximately one-hundredth of the nominal tensile ultimate strength of the bolt in Mpa (Megapascal). The number after the point is10 times the ratio of

EmpEdhttp://www.blogger.com/profile/12579251538554721877noreply@blogger.com0